Audio Cd Recording - Pioneer HTZ-BD50 Mode D'emploi

54 Operation

Audio CD Recording

You can record one desired track or all of the
tracks in Audio CD to a USB storage device.
1. Insert a USB storage device to the USB port
on the front panel.
2. Press Z (OPEN/CLOSE), and place an Audio
CD on the disc tray.
Press Z (OPEN/CLOSE) to close the disc
tray. The playback starts automatically.
3. Press DISPLAY ( ) to display the option
menu.
Press z USB REC button on the remote
control. You can record all musics in the
audio CD.
4. Use U / u to select [CD Recording] option,
4
and press ENTER ( ) to display the [CD
Recording] menu.
Repeat this step to select tracks as many as
you want.
5. Use U / u to select a track you wish to copy
on the menu, and press ENTER ( ).
Repeat this step to select tracks as many as
you can.
Select all the tracks on an Audio
CD.
Selects an encoding option from
the pop-up menu (128 kbps,
192 kbps, 320 kbps or Lossless).
Cancels the recording and
returns to the previous screen.
Or
6. Use U / u / I / i to select [Start], and press
ENTER ( ).
7. Use U / u / I / i to select the destination
folder to be copied.
If you want to create a new folder, use U / u /
I / i to select [New Folder] and press ENTER
( ).
Enter a folder name using the virtual
keyboard, and press ENTER ( ) while [OK] is
selected.
8. Use U / u / I / i to select [OK], and press
ENTER ( ) to start Audio CD recording.
If you want to stop the Audio CD recording,
press ENTER ( ) while [Cancel] is
highlighted.
9. A message appears when Audio CD
recording is completed. Press ENTER ( )
to check the music fi le created in the
destination folder.