Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BUILT-IN MICROWAVE INSTALLATION INSTRUCTIONS
4.
Install Mounting Screws
The microwave oven can tip when the
door is open. The mounting screws supplied with the
microwave oven must be installed to prevent tipping of
the microwave oven and injury to persons.
1. The mounting holes in the side trims may be used as
a template to locate the appliance mounting screw
holes (see figure 5).
2. Use the two screws supplied to fix the appliance to
the cabinet.
Mounting Holes
Figure 5: Mounting Screw Holes
5.
Minimum Cutout Overlap
28"
min cutout
1-1/2"
1/8"
Figure 7: Minimum cutout overlap
6.
Model and Serial Number Location
The serial plate is located along the interior side trim of
the oven and visible when the door is open.
When ordering parts for or making inquiries about your
microwave oven, always be sure to include the model
and serial numbers and a lot number or letter from the
serial plate.
Figure 6: Serial Plate Location
Before You Call for Service
Read the "Before You Call for Service Checklist" and the
"Operating Instructions" in your Use and Care Guide:
17-3/4"
it may save you time and expense. The list includes
min
common occurrences that are not the result of defective
cutout
workmanship or materials in this appliance.
Refer to your Use and Care Guide for service phone
numbers.
15/16"
5
Serial Plate
Publicité
Table des Matières
