Luminance Brands rathy ireland HOME MIDWAY ECO LED CF955LBS00 Manuel Du Propriétaire page 6

3. Ceiling Fan Assembly
3.4
Align the Clevis Pin Holes in the Downrod with the
Holes in the Motor Coupler.
Install the Clevis Pin and secure with the Hairpin Clip
(Figure 4).
The Clevis Pin must go through the Holes in the Motor
Coupler. It is critical that the Clevis Pin in the Motor
Coupler is properly installed and securely tightened.
3.5
While pulling up on the Downrod, securely tighten the
Two Phillips Head Set Screws in the Motor Coupler
(Figure 5).
NOTE: The set screw must be properly installed as
described above, or fan wobble could result.
WARNING
!
It is critical that the clevis pin and set screws in the
motor coupler are properly installed and securely
tightened. Failure to verify that the pin and set screws
are properly installed could result in the fan falling.
3.6
Remove and retain the Three #8-32 x .75" Flat Head
Screws pre-installed on top of the Fan Assembly.
(Figure 6).
(Continued)
DOWNROD
CLEVIS
PIN
MOTOR
MOTOR
COUPLING
COUPLER
Figure 4
DOWNROD
MOTOR
COUPLER
Figure 5
Figure 6
6
HAIRPIN
CLIP
CLEVIS
PIN
HAIRPIN
CLIP
RETIGHTEN
SET SCREWS
DOWNROD
#8-32 x .75" FLAT
HEAD SCREWS (3)
FAN ASSEMBLY
ETL Model No.: CF955L