Luminance Brands rathy ireland HOME MIDWAY ECO LED CF955LBS00 Manuel Du Propriétaire page 14

5. How to Wire Your Ceiling Fan
5.3
Securely connect the Fan Black Wire to the Supply
Black (hot) Wire using Wire Connector (supplied)
(Figure 22).
5.4
After connections have been made, turn Wires upward
and carefully push Wires into the Outlet Box, with the
white and green Wires on one side of the Outlet Box
and position the Black Wires on the other side of the
Outlet Box (Figure 23).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.5
Screw the Two Threaded Studs (supplied) into the
Tapped Holes in the Hanger Bracket (Figure 24).
Your Fan is now wired to be turned ON and OFF from
the Fan Switch.
Figure 22
GREEN
WIRES
WHITE WIRES
Figure 23
THREADED
STUDS (2)
Figure 24
14
(Continued)
SUPPLY BLACK
(HOT)
LISTED WIRE
CONNECTOR
FAN BLACK WIRE
BLACK WIRES
ETL Model No.: CF955L