Luminance Brands rathy ireland HOME MIDWAY ECO LED CF955LBS00 Manuel Du Propriétaire page 11

3. Ceiling Fan Assembly
3.16
Rotate the LED Light Fixture clockwise to engage the
Key Hole Slots onto the Two #8-32 x .375" Pan Head
Screws (Figure 16).
Secure the LED Light Fixture Assembly by tightening
the Two #8-32 x .375" Pan Head Screws.
Reinstall and tighten the previously removed #8-32|x
.375" Pan Head Screw.
A spare #8-32 x .375" Pan Head Screw is supplied in
the loose parts bag, if required.
You have now completed the initial assembly of your
new Ceiling Fan. You can now proceed with hanging
and wiring your Fan.
CAUTION
!
To reduce the risk of injury, install the fan so that the
blades are at least 7 ft. (2.1m) above the floor (Figure 17).
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
(Continued)
REINSTALL ONE
#8-32 x .375"
PAN HEAD SCREW
LED LIGHT
FIXTURE
LOWER
HOUSING
Figure 16
AT LEAST
7'
Figure 17
11
RETIGHTEN
TWO
#8-32 x .375"
PAN HEAD
SCREWS
CEILING
FLOOR
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF955L