Options And Functions Of The Tv Menu; Advanced Settings - Salora 50LED8200CS Mode D'emploi

Options and functions of the TV menu

Content of the image menu
You can edit the image mode according to your preferences and demands. The Image mode can
Mode
be set on one of these options : Cinema , Game, Sport, Dynamic and Natural.
Adjusts the brightness and darkness of the screen.
Contrast
Adjusts the brightness of the screen.
Brightness
Defines the sharpness of objects displayed on the screen.
Sharpness
Adjusts the colour value, adjusts colours.
Colour
If you choose the Power saving mode set to Eco, you can enable or disable the screen . (When
Power Saving
the mode is Dynamic, the Power saving mode set to Eco is automatically disabled.)
Mode
This parameter controls the back-light level. The back-light function will be inactive if the Power
Back-lighting
saving mode is set to Eco. The Back-light mode cannot be enabled in VGA mode Multimedia
(optional)
navigator or when Image mode is defined on the Game.
If the broadcasting signal is weak and the image noisy, use the noise reduction functionality to
Noise reduction
reduce the intensity of the noise.

Advanced settings

You can adjust the dynamic contrast ratio at your convenience.
Dynamic contrast
Colour
Adjusts the desired colour tone.
temperature
Adjusts the size of images in the images zoom menu.
Image zoom
Note: Auto (Available only in Scart mode with SCART PIN8 high/low voltage switch)
When you watch the television from the HDMI source, this option is visible in the Image setting menu. You
HDMI True Black
(optional) can use this option to increase image darkness.
Films are recorded at a number of frames per second different from normal television programs.
Film Mode
Enable this function when you are watching films so as to better visualize the accelerated images.
The skin tone function can be edited between -5 and 5.
Skin tone
Adjusts the desired colour tone.
Colour editing
You can configure the colour temperature values using the RGB Gain functionality.
RGB gain
Resets the image settings to the default values (except Game mode).
Reset
Auto-position (in
Automatically optimises display. Press OK to optimise.
PC mode)
Position H (in PC
This section changes the image horizontally towards the right or left side of the screen.
mode)
Position V (in PC
This element moves the image vertically towards the upper or lower part of the screen.
mode)
The pilot frequency settings correct interferences which appear as vertical lines in the image for
Frequency guide
displays such as worksheets, paragraphs or texts in smaller font sizes.
(in PC mode)
Depending on the resolution and the scanning frequency you enter for the television, you can see
Phase (in PC
a fogged or sound image on the screen. In such a case you can use this element to get a clear
mode)
image through trial and error.
In VGA mode (PC), certain elements of the image menu will be unavailable. On the contrary, the parameters of the VGA mode will be
added to the Image parameters in PC mode.
English - 66 -