Preparation; Before You Begin; Tools And Parts Needed; Parts Included - Thermador Masterpiece Serie Guide D'installation

Preparation

Before you Begin

Before installing the appliance, be sure to verify the
cabinet dimensions are correct for your unit and that the
required electrical connections are present. Make sure
the electrical conduit provided on the unit is able to
reach to the point of connection.
The appliance may only be installed in a cabinet that is
closed on the sides. There must not be any openings on
the sides. If the rear of the cabinet is open (for ventilation
or installation of the appliance), this opening must be
placed against a wall. If this is not possible, the cabinet
must be altered or protected so that no one can reach
into the openings of the appliance.
Decorative or custom panels should not be attached to
steam ovens. This could cause overheating and may
damage the panel over time.

Parts Included

Trim Kit
▯
Trim mounting brackets (2x)
▯
Top bracket
▯
Appliance
▯
Right and left rail
▯
Base pan
▯
Base to Cabinet Screws (4x)
▯
Rail, Trim and Bracket Screws (21x)
▯

Tools and Parts Needed

T20 Star-head screwdriver.
▯
Measuring tape.
▯
Drill with bit ( ")
X
▯
Gloves and long sleeves are recommended (to help
▯
protect hands and arms from scratches).
5