Cleaning And Maintenance - Philips HQ8250/18 Mode D'emploi

EnglisH
12
3 Push the trimmer slide downwards to open
the trimmer.
, You can now start trimming.
4 After trimming, close the trimmer ('click') and
switch off the shaver.
5 HQ8200: Remove the adapter from the wall
socket and pull the small plug out of the shaver.

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.
- Clean the shaver after every shave for optimal
shaving performance.
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
- You can clean the bathroom stand (HQ8253/
HQ8251/HQ8250 only) and the outside of the
shaver with a damp cloth.
Note: Water may leak from the socket at the bottom of
the appliance when you rinse it. This is normal and not
dangerous.
Cleaning the shaving unit under the tap
1 Switch off the shaver and disconnect it from
the mains.