Cleaning And Maintenance - Philips HP6511 Mode D'emploi

The sensitive area cap can only be fitted onto the appliance in one way.
 Switch on the appliance by selecting the desired speed (Fig. ).
We advise you to use speed II.
 Stretch the skin with your free hand.
 Place the appliance perpendicularly onto your skin, with the on/off
slide pointing in the direction in which you are going to move the
appliance.
5 Move the appliance slowly over the skin, against the direction of
the hair growth.
- Epilate your bikini line as shown in the figure (Fig. 6).
- Epilate your underarms as shown in the figure (Fig. 7).
6 For a cool sensation, you can dab the area you have just epilated
with a cloth soaked in cold water.
7 Remove the sensitive area cap from the epilator after use (Fig. ).
Using the peeling glove
Use the peeling glove in the shower.
Regular massages with the peeling glove may help to prevent ingrown
hairs. Do not use the peeling glove immediately before or after epilation.

Cleaning and maintenance

Never rinse the adapter or the appliance itself with water.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.
 Press the release button (1) and pull the epilating head off the
appliance () (Fig. ).
EnglisH
11