Assembling The Pump Body - Philips AVENT SCF314/02 Mode D'emploi

Assembling the Pump Body

Before assembling, make sure that you have correctly washed and sanitized the pump.
See section titled 'Cleaning and Sanitizing Your Pump' on page 6.
Parts you will need for this step:
Pump body
Double pumping? Assemble two pumps as shown below.
Single pumping? Assemble one pump as shown below.
9
White valve
1 Insert the white valve into the pump body,
so that it fits securely into the small round
hole. Make sure the pointed side of the
valve is facing down.
Fit the clear silicone diaphragm into the
2
pump body. Ensure a perfect seal around
the rim by pressing down with your
fingers. (This is easier if assembled while
the diaphragm is wet.)
Clear silicone diaphragm