Exterior Structure - Hendi 263501 Mode D'emploi

Exterior Structure

1. Heating indicator
2. Temperature controller
3. ON/OFF switch
4. Housing
5. Drip tray
Features of Function and Structure
• The upper and lower grill plates are enameled
and are easy to clean.
• Independent temperature controle on the double
contact grill is convenient and allows the use of a
single grill plate.
• Internal temperature protector is reliable and
safe.
Operating instructions
• Before use, make sure the supply voltage match
with the rating plate.
• Plug into the socket & switch on the appliance.
• Set temperature controller clockwise to the de-
sired temperature. The orange indicator light up.
The upper and lower grilling plate starts heating
up.
• Temperature can be adjusted depends on differ-
ent food within 180°C to 250°C.
• After approx. 8 minutes, swivel the upper griling
plate with the handle.
• Put some edible oil on the upper & lower grilling
plate.
6. Lower grill plate
7. Opening support system
8. Upper grill plate
9. Upper grill plate handle
10. Rubber feet
• Grilling temperature is adjustable.
• Made of stainless steel and the drawer-style
dripping tray is also made of stainless steel.
• Grill is easy to open thanks to the support sys-
tem.
• Place the food to be grilled on the lower gilling
plate and then close the appliance using the han-
dle. Keep an eye during cooking.
• When the temperature reaches the setting value,
the orange indicator light off.
• At the front side of the lower grilling plate, there
is the drip tray. The remaining edible oil will flow
to the drip tray.
• Open the appliance by lifting the handle and take
away the grilled food.
• After finish grilling, set the temperature control-
ler to the "OFF" position and unplug the appli-
ance.
EN
5