Preparing For Use - ResMed S7 Lightweight Manuel De L'utilisateur

P
REPARING FOR
S U T R
ETTING P HE
1 Place the R
M
ES
CAUTION
!
Be careful not to place the device where it can be bumped or where someone is
likely to trip over the power cord.
Note: The ResMed S7 Lightweight unit may be placed on the floor beside or underneath
your bed. Ensure that the area is free from dust and clear of bedding, clothes or any other
objects that could block the air inlet.
Connect the power cord to the socket at the rear of the flow generator. Plug the other
2
end of the power cord into a power outlet.
WARNING
!
Make sure the power cord and plug are in good condition and the equipment is
•
not damaged.
The air filter cover protects the device in the event of accidental liquid spillage
•
onto the device. Ensure that the air filter and air filter cover are fitted at all
times.
Connect one end of the air tubing firmly onto the air outlet of the unit.
3
WARNING
!
Only ResMed air tubing should be used with your flow generator. A different type
of air tubing may alter the pressure you actually receive reducing the effectiveness
of your treatment.
Assemble your mask system according to the mask user instructions.
4
U
SE
M S7 L
ES ED IGHTWEIGHT
unit on a table near the head of your bed.
S7 L
ED IGHTWEIGHT
P U
REPARING FOR SE
9