Evolution RAGE 1 Manuel D'instruction page 2

Operating Instructions
Technical Helpline UK: 0870 609 2297
Please read these operating and safety instructions carefully and
completely. For your own safety, before using this equipment
check that the voltage is correct and that all handles and parts are
firmly secured. If you are uncertain about any aspect of using this
equipment, please contact our Technical Helpline.
Technical Helpline USA: 1-866-EVO-TOOL
Model Evolution Rage 1 Specifications
Motor (230v-240v ~ or 110v ~ 50/60 Hz) (Watts):
Maximum Box (1/8" 3mm Wall 90
Maximum Box (1/8" 3mm Wall 45
Optimum Cutting Thickness (Mild Steel Plate):
Maximum Cutting Thickness (Wood):
RPM No Load (min-1):
Recommended Maximum Duty Cycle (Minutes):
Sound Pressure Level (Under Load) (dB(A)):
Vibration Level (Under Load) (m/s
Weight:
Maximum Dimensions HWD:
Minimum Dimensions HWD:
Blade Dimensions
Maximum Diameter:
Bore Diameter:
Thickness:
Standard Equipment Supplied With Unit: 1 Side Handle, 1 Fence Guide,
1 Safety Goggles, 1 Allen Wrench, 1 Carry Case, Ear Plugs, 1 MultiBlade,
1 Operating Instructions.
Ear and eye protection MUST be worn while operating this
equipment. Do NOT touch the blade while it is in motion. Always
follow the Personal Protection Equipment (PPE) recommendations
This machine is designed for cutting steel using the appropriate TCT
(Tungsten Carbide Tipped) blades and accessories. It should NOT be
modified and / or used for any application other than for which it was
intended, including powering other equipment.
Ensure that the total work area can be viewed from the operating position.
Use barriers to keep people 4 metres away, to avoid possible ejected
debris. Do not operate the tool in explosive environments – power tools
create sparks that may ignite flammable materials or gases. Do not
operate the tool in damp or wet conditions or areas, as electric shocks
may result. Always use both hands to operate the tool. Always ensure
that the material you are working on is securely clamped.
This tool is equipped with an approved cord and plug for its intended
•
Country of use. The green and yellow conductor in the cord is the
grounding wire, never connect this to a live terminal.
Remove plug from power supply before replacement of the blade,
•
making adjustments, or other maintenance work.
Use only genuine EVOLUTION brand saw blades.
•
Inspect the machine and blade before each use and do not use
•
deformed, cracked, worn or otherwise damaged blades.
Ensure the blade is correctly mounted and is appropriate for the
•
material to be cut.
Do not use blades made of high-speed steel.
•
Do not use blades that do not comply with the characteristics
•
Important
Please Keep These Instructions
0
0
(9-1/2"x10-1/4"x15-3/4") 240x260x400
while operating this tool.
):
):
):
2
(11"x15-1/2"x17-3/4") 280x395x450
1
(2-3/16") 55mm
(1-3/8") 35mm
(3/8")
(1") 25.4mm
100.8
(12-1/4 lbs)
(7-1/4") 185mm
20mm
(1/16")
1050
6mm
3500
30
4.8
5.5kg
2mm