Adjusting Microphone Sensitivity - Philips Avent SCD530 Mode D'emploi

nightlight on/off
1 Select 'Light' with the + and - buttons.
2 Press the OK button to confirm.
3 If the nightlight is off, the display shows 'On?'. Press the OK button to switch on the
nightlight. If the nightlight is on, the display shows 'Off?'. Press the OK button to switch off
the nightlight.
lullaby function
Selecting a lullaby
1 Select 'Lullaby' with the + and - buttons.
2 Press the OK button to confirm.
3 Press the + button once or several times to select one of the five lullabies from the list or to
select 'Play All'.
4 Press the OK button to confirm.
When you have selected one of the five lullabies, it plays continuously.
Switching to another lullaby
1 Press the + button to choose another lullaby from the list.
2 Press the OK button to confirm.
pausing a lullaby
1 Press the OK button.
The message 'Paused' appears on the display.
,
2 Press the OK button again to continue the lullaby.
If you do not continue the lullaby within 20 seconds, the lullaby function switches off automatically.
The message 'Paused' and the lullaby symbol disappear from the display.
Stopping a lullaby
1 Press the + button to select 'Stop' from the list.
2 Press the OK button to confirm.

adjusting microphone sensitivity

Note: You can only adjust the microphone sensitivity in the menu of the parent unit.
You can set the microphone sensitivity of the baby unit to the desired level. You can only change the
microphone sensitivity when a connection between the baby unit and the parent unit has been
established, i.e. when the LINK light on the parent unit lights up green continuously.
1 Select 'Sensitivity' with the + and - buttons.
2 Press the OK button to confirm.
3 Select the desired microphone sensitivity level for the baby unit with the + and - buttons.
h = minimum sensitivity level
,
i = maximum sensitivity level
,
4 Press the OK button to confirm.
The message 'Saved' appears on the display.
,
Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and
therefore transmits more often. As a result, the units consume more power.
EngliSh
13