Scale Parameters - Adam AE 402 Notice Utilisation

C3 PrM
Printing
Manual, Continuous or
Automatic
C4 Aon
Enable or disable the
Accumulation
C5 Ln
Select Language
C6 UId
Set User ID
C7 Sid
Set Scale ID
Scale will perform the following, depending on the Accumulation and Print Settings:
A
CCUMULATION
SETTINGS
PRINT SETTINGS
AUto
mAn
Cont
Not available
approved scales
7.4

SCALE PARAMETERS

• Press [Z/T] to view the list of parameters.
• Press [Z/T] to enter a parameter. Use the [Unit/] key and [Pcs/] key to
set the values or just the [Pcs/] key to select the options.
• Press [Z/T] to confirm the change and then advance to the next parameter by
pressing the [Pcs/] key.
• Press [Print/M+/Esc] to return to the group "FUnC 4". If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to normal weighing.
Mode-
AC on
Accumulate
automatically
Accumulate and Print only
when [Print/M+/Esc]
pressed. If [Print/M+/Esc] is
pressed a second time only
print the weight.
Print continuously.
Accumulate when
on
[Print/M+/Esc] key is pressed
mAn,
Cont
not on
(
approved scales)
AUto
AC on
AC oFF
EnGLi (English)
FrEnCH (French)
GErmAn (German)
SPAn (Spanish)
To be entered
manually
To be entered
manually
AC Off
and print Print automatically,
Do not accumulate
Print when [Print/M+/Esc] key is
key pressed,
Do not accumulate.
Print continuously.
Do not accumulate.
© Adam Equipment Company 2010
mAn
EC
AC on
EnGLi
000000
000000