Accumulated Total - Adam AE 402 Notice Utilisation

6.6

ACCUMULATED TOTAL

• The scale can be set to accumulate manually by pressing the
[Print/M+/Esc] key or automatically when a weight is removed from
the scale. See the Section 7.3 for details of setting the Parameter "C3
PRM" and "C4 Aon". The accumulation function is available when
weighing or when counting parts. However the memory is cleared if
the weighing units or functions are changed.
When the weight (or count) displayed is stored in memory the display
•
will show "ACC 1" and then the total in memory for 2 seconds before
returning to weighing. The RS-232 interface will output to a printer or
PC.
• Remove the weight, allowing the scale to return to zero and put a
second weight on. When this value is stored, the display will show "ACC
2", then the new total and finally the value of the second weight.
Repeat as necessary to add all the values needed to the memory.
To view the total in memory press the [Print/M+/Esc] key when there is
•
no weight on the scale. The display will show the number of entries
and the total.
To clear the memory (set the value to zero) press the [Func/C] key
•
during the time the totals are being displayed.
© Adam Equipment Company 2010