Parts Counting - Adam AE 402 Notice Utilisation

6.4

PARTS COUNTING

If parts counting is enabled, See section 7.4, it is possible to count parts using a
sample of the parts to determine average piece weight.
• Before starting, tare the weight of any container that may be used,
leaving the empty container on the scale. Place a known number of
samples in the container, if used. The number should match the
options for parts counting, i.e., 10, 20, 50, 100 or 200 pieces.
• When the scale is showing weight, pressing the [Pcs/] key will start
the parts counting function.
• The scale will show "P 10" asking for a sample size of 10 parts. Change
the sample size to the desired quantity by pressing the [Pcs/] key. It
will cycle through the options: 10, 20, 50, 100, 200 and back to 10.
• Press the [Z/T] key again when the number matches the number of
parts used as the sample.
show the number of parts (Pcs).
• Pressing the [Unit/] key will display the unit weight (g/pcs), pressing
it second time will display the net weight (pcs and kg) and the third
time, it will be the count again (pcs).
As more weight is added the display will
© Adam Equipment Company 2010