Key Descriptions - Adam AE 402 Notice Utilisation

4.0 KEY DESCRIPTIONS

[>Z/T<]
[Pcs/]
[Unit/]
If near zero, Sets the zero point for all subsequent weighing.
The display shows zero.
Tares the scale. Stores the weight currently on the scale as
tare value, subtracts the tare value from the gross weight
and shows the results
A secondary function,
setting up the value for the Parameters.
Selects parts counting. Used to set the sample quantities
while parts counting.
A secondary function,  is of incrementing the active digit
when setting a value for Parameters.
Selects the weighing unit to be displayed from those which
are enabled. See parameter S1 in section 7.4.
A secondary function,  is to move the active/flashing digit
to the left when setting values for Parameters.
is of "Enter" key used when
© Adam Equipment Company 2010