Embedding Box Positioning - golmar VistaPlus Manuel D'installation

102
A
ssembly of the door panel
Insert the header DOWN marked in the lower module and fix it by screwing the module shafts.
Place the module spacer between lower and next modules, assuring that the spacer adjustment
notches are inside the panel Fix the module by screwing the shafts. Repeat this procedure
in case of door panels with one more module (the maximum number of modules placed
vertically is three
Insert the header UP marked in the last module and fix it by screwing the supplied screws.
DOOR PANEL INSTALLATION
Pass the wiring through the hole made in the bottom part of
the embedding box
Once the embedding box is placed, remove the protective
labels from the attaching door panel holes
modules.
.
).
P
lace the embedding
. Level and flush the embedding box.
box.
.