Storage; Disposal; What If There Are Problems; Technical Data - Beurer FWM 50 Mode D'emploi

Masquer les pouces Voir aussi pour FWM 50:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
IMPORTANT
Please note that the foot warmer must not be washed, chemically cleaned, wrung out, tumble dried,
put through a mangle or ironed. Failure to observe this may result in damage to the foot warmer.
• The removable lining is machine washable at 30°.
• Use a delicate laundry detergent and measure it out according to the manufacturer's instructions.
IMPORTANT
Only use the foot warmer again once the foot warmer and lining have fully dried. Otherwise, there is
a risk of damage.

7. Storage

If you do not plan to use the foot warmer for a long period of time, we recommend that you store it in the
original packaging.
IMPORTANT
• Please allow the foot warmer to cool down before storing. Failure to
observe this may result in damage to the foot warmer.
• To avoid damaging the foot warmer, do not place any objects on top
of it whilst storing.

8. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accord-
ance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.

9. What if there are problems?

Problem
The foot warmer does not warm up or the massage function
cannot be activated while:
– the mains part is connected to a working socket.
– the mains part cable is connected to the connector socket on
the foot warmer.
– both functions (heat + massage) are switched on.

10. Technical data

For technical data about the foot warmer, see the type plate label on the foot warmer.
For technical data about the mains part, see the type plate label on the mains part.
Permissible mains parts:
EU mains plug: IVP1200-2000G
UK mains plug: IVP1200-2000B
Model identifier
Input voltage
Input frequency
Output voltage
Cause
The foot warmer
is faulty.
IVP1200-2000B
100 V - 240 V
50/60 Hz
12.0 V
15
Solution
Send the foot
warmer for servicing.

Publicité

Table des Matières
loading

Table des Matières