Maintenance And Storage - Beurer MC4000 Mode D'emploi

Additional settings, operating options
Folding mechanism
Rotating mechanism
7.

Maintenance and storage

Warning!
• The device must be switched off at the main switch
after every use and before cleaning.
• Pull the mains plug out of the socket.
> Wipe the massage chair from time to time with a
dry, lint-free or slightly damp cloth.
> Every two to three months, wipe the chair using a
clean cloth with a small amount of care product for
artificial leather.
> Afterwards, dry the chair with a clean, dry cloth.
The massage chair can be folded away to save space when stored.
> Switch off the controls at the
The massage chair returns to the start position.
> Once the chair has reached the start position, switch off the
massage chair using the main switch.
> Pull the mains plug from the socket.
> Hold the back rest from behind and release the locking
mechanism on the underside of the back rest using your foot.
> Carefully push the back rest forwards on to the seat.
If required, lay the back rest cushion back over the back rest
before doing so.
The massage chair can be rotated 60° to the left or to the right.
Artificial leather is sensitive to grease. Clean the
massage chair only using care products designated
for artificial leather.
Important!
• Clean the device using only the methods specified.
• Under no circumstances may liquid enter the
device.
• Do not use any solvent-based cleaning products.
• Do not use aggressive cleaning products.
These can damage the surface.
Folding mechanism, see above
w
18
on/off button.