Before The First Use - Fritel RG 2170 Mode D'emploi

Masquer les pouces Voir aussi pour RG 2170:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BEFORE THE FIRST USE

 Check if the mains voltage of your appliance (230 Volt) corresponds with the mains voltage in your
home.
 Remove all packaging and stickers.
 Turn on the appliance ad let it heat up for about 10 minutes. Turn off the appliance again, pull the
cord from the socket.
 Let the appliance cool down completely.
 Remove the plate and the pans from the appliance. Clean the plate and the pansas described under
'Cleaning' before the first use.
 Put the plate back into the appliance.
 The appliance is now ready for use.
 ATTENTION: Upon the first use, there might be a slight odour or smoke output. This is normal.
2. START TO GRILL
 Completely unroll the power cord, and plug in the appliance in a 230 V socket.
 Turn the appliance on by means of the On – Off switch. When the appliance is turned on, the switch
illuminates.
 ATTENTION: the appliance will now get hot.
 ATTENTION: do not use frozen food!
 Put the chosen food on the grill plate or in the pans and put them under the grill.
 Do not use sharp utensils to turn or (re)move the food as they could damage the non-stick coating of
the plate or pans.
 After use pull out the plug and switch off the appliance.
 Let the appliance cool off entirely before moving it, removing the baking plate or cleaning it.
3. CLEANING
 Pull the plug from the socket.
 Let the appliance cool off entirely before removing the plate.
 The grill plate and the pans are dishwasher proof. But if you choose to clean them by hand with hot
water and detergent, make sure NEVER to use stiff washing-up brushes, only a soft cloth!
 The base and the housing of the appliance can be cleaned with a damp cloth. NEVER IMMERSE
these parts in water or in any other liquid.
4. USEFUL TIPS IN CASE OF MALFUNCTIONS
Do not use the appliance when it is malfunctioning. First go through the following:
The appliance doesn't warm or the control lamp doesn't light up:
o Check if your appliance is connected to the right mains voltage, whether there is mains
voltage, and if the appliance was plugged in correctly.
o If there is still a malfunctioning, please return the appliance to your sales point.
o If the power cord is damaged, don't use your appliance and return it to your sales point
immediately.
10

Publicité

Table des Matières
loading

Table des Matières