ALWAYS place the appliance on a solid and flat base, such as a kitchen
counter or table, so that the appliance won't move or turn over.
Only use the appliance inside, for domestic use.
NEVER use extension cords or sockets. Place the appliance near a
power point and connect it directly. ALWAYS complete unroll the power
cord.
NEVER place the power supply cord near heat sources such as cookers,
heatings or ovens.
NEVER place the appliance near curtains, wall decoration, clothing,
towels or other inflammable objects.
NEVER use accessories from other appliances.
Only use the appliance on the mains voltage as indicated on the
identification label.
This appliance is only suited for indoor household use, and not for
professional use.
The appliance may only be used if the grill stone has been placed
correctly.
2. BEFORE THE FIRST USE
Check if the mains voltage of your appliance (230 Volt) corresponds with
the mains voltage in your home.
Remove all packaging and stickers.
Turn on the appliance ad let it heat up for about 10 minutes.
ATTENTION: Upon the first use, there might be a slight odour or smoke
output. This is normal.
Turn off the appliance again, pull the cord from the socket.
Let the appliance cool down completely.
Remove the stone and the pans from the appliance. Clean the stone and
the pans as described under 'Cleaning' before the first use.
Put the stone back into the appliance.
The appliance is now ready for use.
3. START TO GRILL
Completely unroll the power cord, and plug in the appliance in a 230 V
socket.
Turn the appliance on by means of the On – Off switch. When the
appliance is turned on, the switch illuminates.
17