Getting To Know Your Dishwasher; Control Panel - Gaggenau GI 245–160 Mode D'emploi

If a fault occurs
Repairs or other work on the
dishwasher should only be carried out
by a qualified specialist.
The dishwasher must be disconnected
from the electricity supply before any
repairs or other work are started. Pull
the mains plug out of the wall socket or
switch off at the fuse box. Grasp the
plug to remove it from the socket; do
not tug on the cable. Turn the water off
at the tap.
When disposing of old
appliances
Appliances that have reached the end
of their service life should be rendered
inoperable in order to exclude the
possibility of subsequent accidents. Pull
the mains plug out of the wall socket,
cut through the connecting cable and
disable the door lock.
Take the appliance to a designated
waste disposal centre.
Warning
Children could get locked in the appliance
(risk of suffocation) or get stuck in other
positions.
Therefore: Remove the mains plug, cut the
mains wire and set aside. Damage the
door lock so that the door can no longer
be closed.
Getting to know your
dishwasher
Illustrations of the control panel and the
interior of the dishwasher are shown on
the rear fold-out cover of this manual. Fold
this page out before you read the manual.

Control panel

Main switch
1
Door opener
2
Time delay
3
Digital display/
4
Programme progress indicator
Salt refill indicator
5
Rinse-aid refill indicator
6
Programme buttons
7
Additional functions *
8
* some models only
en
27