Displaying The Firmware Version Of The Printer - Sony Ericsson UP-DR100 Mode D'emploi

To display the remaining amount of the ink
ribbon:
Select "RIBBON REMAIN."
F f
Press and
RIBBON REMAIN.
Remaining amount of the ink
ribbon
To display the remaining amount of paper:
Select "PAPER REMAIN".
F f
Press and
PAPER REMAIN.
Remaining amount of paper
3
Press the MENU button after confirming.
The printer returns to the on-line mode, and the
ONLINE indicator lights.
Note
If the ink ribbon and paper have not been used from
the beginning, the remaining amount displayed
may be incorrect.
to display
to display
Displaying the Firmware
Version of the Printer
The version of the firmware of the printer can be
displayed.
1,3
1
Press the MENU button.
The ONLINE indicator goes off and the printer is
switched to off-line.
2
Press the F and f buttons to display VERSION.
F f
Press and to display VERSION.
Version of the firmware of the printer
3
Press the MENU button after confirming.
The printer returns to the on-line mode, and the
ONLINE indicator lights.
Access the following site to get the latest information on
the printer.
http://www.sony.co.jp/DP-driver-E/

Displaying the Firmware Version of the Printer

2
ONLINE indicator
47