Printing From The Computer - Sony Ericsson UP-DR100 Mode D'emploi

6
Push the right pink spool to the left and pull it
toward you to remove the pink spool of the ink
ribbon.
Attach both pink and blue spools of the ink ribbon.
7
Remove the paper.
1 Pull the cover up.
2 Turn both flanges of the paper toward the inside
to wind the remaining paper.
3 Remove the paper roll.
Wind the remaining paper by turning the
flanges of the paper roll in the direction of
the arrow 2.
Caution
Since the thermal head is still very hot just after
printing is finished, be careful not to touch the
thermal head when removing the paper roll from
the paper holder.
42

Printing from the Computer

Printing from the
Computer
Before starting to print
• Confirm that the printer and computer are connected
(page 36).
• Confirm that the paper and the ink ribbon are correctly
installed (page 34).
• Confirm that the compatible ink ribbon and printing
paper are installed (page 51).
Printing
information display
1
Turn on the printer and computer.
After a few seconds, the following message should
appear on the information display. When READY
is displayed and the ONLINE indicator is lit, the
printer is ready to print.
Print size
Displays the remaining amount of
paper or ink ribbon, whichever is less.
ONLINE indicator
1