Preparation; Supplied Accessories; Assembly - Sony Ericsson UP-DR100 Mode D'emploi

Preparation

Supplied Accessories

Make certain you have received the following
accessories:
Paper Scrap Tray (1)
Power Cord (1)
CD-ROM (1)
Operating Manual (1)
Software License Agreement (1)
Warranty Card (1)
Service and Customer Support
Information (1)
Notes
• When taking out the printer, be careful not to hurt your
back.
• The packaging materials are needed when
transporting the printer, so we suggest you keep them.
• Before moving the printer, remove the ink ribbon and
paper.
34
Supplied Accessories

Assembly

Mount the paper scrap tray on the printer.
Paper scrap tray
To remove the Paper scrap tray
Hold both ends of the paper scrap tray and pull it
forward.
Paper output tray
The paper output tray supplied with the printer is
designed to accumulate only one printed sheet for the
UPC-R35 and UPC-R46 printing packs. When using the
UPC-R35 or UPC-R46, open the paper output tray to
hold the printout by pressing it down. When using the
UPC-R57, be sure to close the paper output tray.
If you want to accumulate 2 or more printed sheets
regardless of the type of printing pack used, use the
UPA-DR100PS PRINT STACKER (not supplied).
Paper output
tray
Paper and ink ribbon
For detailed information on how to install the ink ribbon
and paper, see "Loading the Paper and Ink Ribbon" on
page 37.