Skil DL529301 Guide D'utilisation page 142

Defective Charger
If the charger self-inspection fails to react when the charger is plugged in, the causes include
no power to the charger, bad contacts, or a defective charger. Check to see if the charger self-
inspection can be activated when the charger is plugged in again or plugged into a different
outlet. If it still fails, have the charger serviced by an Authorized SKIL Service Station.
Defective Battery Pack
If the charger detects a problem, the red Defect Indicator will begin flashing. Remove and
re-insert the battery pack in the charger. If the Defect Indicator flashes a second time, try
charging a different battery pack.
a) If a different battery pack charges normally, have the first defective battery pack serviced by
an Authorized SKIL Service Station.
b) If a different battery pack also indicates "defective," the charger may be defective. Have the
charger serviced by an Authorized SKIL Service Station.
Fig. 4
Wall-Mount Holes (Fig. 4)
Cord slot
The charger has hanging holes for convenient
storage. Install screws in the wall 2.25 inches
(57.1mm) apart.
Use screws sufficiently strong to hold the
combined weight of the charger and battery
pack.
There is also a slot for conveniently positioning
the cord.
Hanging holes
14