Cord, Hose And Accessory Storage; Of Qwik Lock Filter - RIDGID 4000RV0 Mode D'emploi

SP6938-2 4 gallon ESF_SP6938 4/26/16 11:34 AM Page 7

Cord, hose and Accessory Storage

1. Your Vac has a convenient area to
store your power cord and Vac hose.
2. Wrap the power cord around the top of
the handle on the Vac and attach the
end of the plug to the cord.
3. Wrap the hose around the Vac as
shown and place the small swivel end
inside the larger one.
Filter
WARNING: To reduce the risk of
injury from accidental starting,
unplug power cord before changing
or cleaning filter or foam pad.
NOTE: The filter is made of high quality
paper designed to stop very small particles
of dust. The filter can be used for dry pick up
or small amounts of liquid. Handle the filter
carefully when removing to clean or
installing it. Creases in the filter pleats may
occur from installation but will not affect the
performance of the filter.
Car Nozzle
Compartment
Handle
Filter Removal and Installation
of the Qwik lock™ Filter
To Remove Power head:
1. Grasp the drum latches on both the
right and left side of the power head.
Slowly pull the drum latches away from
the drum. Lift the power head off the
drum. Place the lid assembly of the Vac
upside down.
Power
Head
7
Hose
Storage
Area
Power
Cord
Drum Latches (2)
Pull Out
And
Lift Up
Drum