Accessory Storage; Cord Wrap; Hose Storage - RIDGID RV24000 Manuel Du Propriétaire

Accessory Storage

Your Accessories may be stored in the
Tool Holder or in the two locations on
the Caddy Right/Left.
NOTE: Insert male end of extension
wand into the holder sleeve (not included
on all models) as shown.
Accessory Storage Compartment

Cord Wrap

When vacuuming is complete, unplug
the Cord and wrap it around the
Powerhead Assembly. Secure the Cord
using the Cord Clip on the Plug.
The Power Cord should wrap under the
Push/Pull Handle (above the Inlet) and
around and under the Cord Wrap of the
Motor Cover.
Push/Pull Handle
SP6729-5 RIDGID ESF 111418.indb 16

Hose Storage

The Professional Locking Hose may be
stored by wrapping it around the Unit
and plugging the open end into one
of the storage locations on the Caddy
Assembly.
vacuum while the hose is still
Extension
wrapped around the powerhead
Wand
assembly in the storage position.
Extension
Wand
Storage
(Not Included
Do not put any object into
On All Models)
ventilation openings. Do not
vacuum with any ventilation
openings blocked; keep free of
dust, lint, hair or anything that may
reduce air flow.
Cord Wrap
Power
Cord
16
CAUTION: Do not operate
!
WARNING:
!
Hose Storage
Area
12/3/18 11:18 PM