Normal Operation - Tripp-Lite SmartOnline 8kVA Manuel Du Propriétaire

Operation (continued)

Normal Operation

During normal operation, the first line of your LCD Display shows which operating mode your UPS is in: Online, Economy, On Battery, or Bypass.
Online mode: The UPS provides AC power while utility power is available and switches to On Battery mode instantly (zero transfer time) if AC
power is interrupted.
Economy mode: The UPS provides AC power at high efficiency while utility power is within +/- 10% rated AC input voltage and switches to On
Battery mode (zero transfer time) if AC power is interrupted.
Industrial mode: If the UPS detects an output voltage fluctuation more than 5 ms, the UPS will transfer to Bypass mode, returning to Online mode
when the output is back to normal.
On Battery mode: The UPS provides AC power from battery backup so long as battery power lasts. It switches back to Online or Economy mode
if utility power is available and shuts down if it runs out of battery power.
Bypass mode: The UPS provides AC power while utility power is available. The UPS shuts down if AC power is interrupted.
Parallel mode: The UPS can provide redundancy up to 10K or power up to 20K. Refer to your Paralleling Kit manual for more information.
The second line of the LCD Display shows basic power conditions. Push the SCROLL buttons to browse through these basic power conditions in
the sequence shown below.
UPS Setup Menu
Press the UPh and DOWNi buttons simultaneously for 3 seconds until the SETUP MENU screen appears as seen below:
Press the UPh button to enter Set Up Mode.
To enter Set Up Mode, you will be required to enter a password.
Numbers increase or decrease by 1 when pressing the UPh and DOWNi buttons (0-9). Scroll to select the first number, then press the ON
button. This saves the first number and moves on to the next in the sequence. The password range is 0000-9999 and should be changed by the
administrator. The DEFAULT password is 1234.
201102160 93-2897.indb 14
LOAD LEVEL
BATTERY CAPACITY
00.00KW / 000%
000V / 000%

LOAD LEVEL
LOAD LEVEL
00.00KVA / 000%
00.00KW / 000%

INPUT VOLTAGE
LOAD LEVEL
000V / 00.0Hz
00.00KVA / 000%

BYPASS VOLTAGE
BYPASS VOLTAGE
000V / 00.0Hz
000V / 00.0Hz

OUTPUT VOLTAGE
OUTPUT VOLTAGE
000V / 00.0Hz
000V / 00.0Hz

BATTERY CAPACITY ON-LINE 10KVA
V00 CV01
000V / 000%

ON-LINE 10KVA
V00 CV01
UPS SETUP
EXIT ENTER
PASSWORD : 0000
ENT DOWN UP XX
14





3/30/2011 9:30:52 AM