Tripp-Lite SmartOnline 8kVA Manuel Du Propriétaire page 19

Operation (continued)
Output Settings
ECO Mode: used to set the UPS' ability to work in the energy saving Economy Mode. When input voltage is in a + or - range of 10% of the overall
voltage rating, the UPS will transfer into an Economy Mode to improve the efficiency of the UPS. From the SETUP MENU screen, scroll DOWNi
until you reach the OUTPUT SETTING screen. From here, press ON for the OUTPUT VOLTAGE screen, and DOWNi through the FREQ
CONVERTER screen until you reach the ECO MODE screen. From here, press ON and now you can scroll DOWNi or UPh between DISABLE
and ENABLE. Press ON to save your selection. The DEFAULT setting is DISABLE.
Industrial: used to set the UPS' voltage protection. If enabled, and receiving AC power with input voltage and frequency within a normal range
the UPS will work in an On-Line mode. If the UPS detects an output voltage fluctuation more than 5 ms, the UPS will transfer to Bypass Mode,
returning to On-Line Mode when the output is back to normal. From the STARTUP MENU screen, scroll DOWNi until you reach the OUTPUT
SETTING screen. From here, press ON to reach the OUTPUT VOLTAGE screen, and DOWNi until you reach the INDUSTRIAL screen. From
here, press ON and you can now scroll DOWNi or UPh for ENABLE or DISABLE. Press ON to save your selection. The DEFAULT is DISABLE.
Scrolling DOWN from the INDUSTRIAL screen will take you to a REDUNDANCY screen. From here, press ON and you can now scroll DOWN
or UP for ENABLE or DISABLE. The DEFAULT setting is DISABLE.
201102160 93-2897.indb 19
OUTPUT SETTING OUTPUT VOLTAGE
ENT DOWN UP ENT
To ENTER

FREQ. CONVERTER
ENT
ENT
OUTPUT SETTING OUTPUT VOLTAGE
ENT DOWN UP ENT
To ENTER

FREQ. CONVERTER
ENT
ENT
ENT
ENT
DOWN UP

DOWN UP

ECO MODE
*DISABLE*
DOWN UP
ENT

ENT
DOWN UP

DOWN UP

ECO MODE
DOWN UP

INDUSTRIAL
*ENABLE*
DOWN UP
ENT

ENT
REDUNDANCY
*ENABLE*
DOWN UP
ENT

ENT
19
DOWN UP

ENABLE
DOWN UP
DOWN UP

DISABLE
DOWN UP
DOWN UP

DISABLE
DOWN UP
3/30/2011 9:30:52 AM