gdw 1061 Mode D'emploi page 5

Renault Master + Opel Movano
1998 - ....
Ref. 1061
Fitting instructions
1) Detach, on both sides of the car, the 2 bolts which attach the bumper supports to the chassis.
2) Place the mounting pieces (f) against the chassis on the srew-thread holes, of which the points (C) fit the
points (C) of the already mounted pieces (e).
Insert the necessary bolts and washers but do not tighten yet.
3) Place the tow bar in between the mounting pieces (e), so that points (D) and (D') of the tow bar fit those
of the mounting pieces.
Insert the bolts, washers and nuts and tighten everything firmly.
4) Install the (*) and also tighten firmly.
Composition
1 tow bar reference 1061
1 flange ball 50T90
2 bolts M16x50
2 safety washers M16
2 nuts M16
1 security shackle 50T
4 bolts M10x45
4 safety washers M10
10 bolts M12x30
11 safety washers M12
5 nuts M12
2 mounting pieces (e)
2 mounting pieces (f)
1 bolt M12x25
1 socket holder (P07)
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(*)
(A)
(A)
(B-C-D-D')
(B-C-D-D')
(C-D)
(A-C-D-D')
(B-C)