5
Close the interface cover (E) and the
lock key (F).
6
Match the positions of the hooks of the
camera and wall mounting adaptor (G).
7
Rotate the camera until you hear a click
and the camera is securely mounted.
7
5
6
Important:
R Make sure to close the interface cover
securely. Weatherproofness cannot be
assured if the interface cover is open.
For assistance, visit www.panasonic.ca/english/support
HN7051C_(en_en)_0319_ver.040.pdf
Using the spacer
Use the supplied spacer to adjust the
installation angle of the camera.
Insert the spacer between the wall mounting
adaptor and the wall.
7
Removing the front door camera
Rotate the camera towards the wall (A), and
then pull it away from the wall mounting
adaptor (B).
27
1
2
2018/03/19
Setup
27
19:00:12