Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Location
Do not install in these
locations
Installing in the following areas may
cause deformation, discoloration,
malfunction, or operational failure
R In direct sunlight or directly under an
outdoor light (even if the surroundings are
within operational temperature range, parts
of the product may become hot)
R Areas subject to frequent vibration, shock,
or impact
R Near fire, heating devices, or air
conditioners (including outdoor equipment
such as unit compressors)
R Areas exposed to grease or steam
R Near devices that emit strong radio waves,
such as mobile phones
R Areas subject to extreme temperature
changes (which can lead to condensation).
If condensation occurs, wipe the outer
surface of the product with a soft dry cloth.
R Near coasts directly subjected to sea
breezes, or near sulfuric hot springs
(exposure to salt can shorten the life of the
product)
R Near TVs, radios, automated office
equipment such as computers, air
conditioners, water heater panels (with
intercom), or home security equipment
(these may cause noise)
R Near satellite broadcasting receivers such
as tuners, TVs with built-in satellite tuners,
and recorders (broadcasted images may be
distorted)
R Areas where hydrogen sulfide, ammonia,
dust, or toxic gases are present
Installing in the following areas may
cause false detections
R Areas where people approach directly from
the front of the camera, such as narrow
walkways (outdoor camera)
R Areas where objects such as trees or
hanging laundry move due to wind
For assistance, visit www.panasonic.ca/english/support
16
HN7051C_(en_en)_0319_ver.040.pdf
(temperature variation and motion may
cause false detections)
R Areas affected by breezes from fans, air
conditioning unit compressors, water
heaters, or car exhaust (severe
temperature variations may cause false
detections)
R Areas subject to severe weather, such as
strong wind (camera shake can cause false
detections) or rain (strong rain may be
detected as an object moving in front of the
camera)
R Areas with reflective objects, such as glass,
that can interfere with detection of
temperature variation
R Areas where brightness changes easily
R Areas where backlight occurs (faces
appear dark and are difficult to identify),
such as the following
– Areas where most of the background is
the sky
– Areas where direct sunlight reflects off a
white wall or background
– Bright areas such as those exposed to
direct sunlight
16
2018/03/19
19:00:11
Publicité
Chapitres
Table des Matières
