ResMed Lumis HFT Mode D'emploi page 22

Sound
Pressure level measured according to ISO 80601-2-74:2017 (HFT mode):
ClimateLineAir:
ClimateLineAir and 5 L/min supplemental oxygen:
ClimateLineAir and 10 L/min supplemental oxygen:
ClimateLineAir and 15 L/min supplemental oxygen:
*Tested value may not comply to ISO 80601-2-74:2017 due to measurement uncertainty
Physical - device and humidifier
Dimensions (H x W x D):
Air outlet (complies with ISO 5356-1:2015):
Weight (device and cleanable humidifier):
Housing construction:
Water capacity:
Cleanable humidifier - material:
Temperature
Maximum heater plate:
Cut-out:
Maximum gas temperature:
Air filter
Standard:
Hypoallergenic:
Wireless module
Technology used:
It is recommended that the device is a minimum distance of 2 cm from the body during operation. Not applicable to masks,
tubes or accessories. Technology may not be available in all regions.
Declaration of Conformity (DoC to the Radio Equipment Directive)
ResMed declares that the Lumis HFT device (models 285xx) is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU (RED). A copy of the Declaration of Conformity (DoC) can be found on
Resmed.com/productsupport
This device can be used in all European countries without any restrictions.
All ResMed devices are classified as medical devices under the Medical Device Directive. Any labelling of the product and
printed material, showing
amendment (2007/47/EC).
Supplemental oxygen
Maximum flow:
Device air leak at 25 cmH2O:
0123, relates to the Council Directive 93/42/EEC including the Medical Device Directive
38 dBA with uncertainty of 2 dBA
39 dBA with uncertainty of 2 dBA
46 dBA with uncertainty of 2 dBA
51 dBA with uncertainty of 2 dBA*
116 mm x 265 mm x 150 mm
22 mm
1290 g
Flame retardant engineering thermoplastic
To maximum fill line 380 mL
Injection moulded plastic, stainless steel and silicone seal
76°C
78°C
≤ 43°C
Material: Polyester non-woven fibre
Average arrestance: >75% for ~7 micron dust
Material: Acrylic and polypropylene fibres in a polypropylene
carrier
Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron
dust
4G (LTE)
15 L/min
≤ 2L/min
English 21