WOLFF MAMBO Evo D Mode D'emploi page 15

Mounting the additional weight
Always lock the additional weight with the screw nuts. Use only
the genuine Wolff weight.
Do not use any other weights! This may overstress the machine.
Use
Mount discs or brushes as described above.
Put the handle in working position with the lever (1) at
the back.
We recommend to position the hand grip in the height of
the users hip.
Lift the handle slightly, to make sure the machine stands
horizontally.
Keep safety switch (2) pressed.
Switch on the machine with one of the levers (3) located
beneath the grip.
Release switch (2).
Note: lever can only be actuated, if the handle is not in vertical
position. This is a safety feature! The user cannot control the
machine with vertical handle.
After switching on the machine, the handle will move shortly to
the right.
Adjusting transportation wheels
If the transportation wheels are in lifted position, the direction in
which the machine moves, is controlled by lifting or lowering the
grip. The more you lift or lower the grip, the faster the machine
runs to the corresponding direction.
lifting the grip: machine runs to the right
lowering the grip: machine runs to the left.
If you feel unsafe or cannot control the machine just release
lever (3). The machine will stop at once.
If you have carried out some training, you will be able to opera-
te the machine with one hand.
If the transportation wheels are lowered to the floor, the machi-
ne is stabilised and easier to control.
Lifting and lowering of the handle is no more necessary.
The machine has to be in a levelled position. The wheels
have to be fixed accordingly.
By loosening the release handle (5), the wheels can be put in
upper and lowered position.
08/2010 Schleifmaschine MAMBO Evo, Artikel-Nr. 061804
screw nuts
(2)
5
CAUTION:
If you work with PKD-Segments or you are milling, the
transportation wheels have to be set on the floor.
Additional weight
(3)
Ausrasten durch
Anheben
15