WOLFF MAMBO Evo D Mode D'emploi page 19

7.2 Description of grinding, milling and cleaning discs
Paper grinding discs double sided, 375x40mm
Grade 16, Item-No 013531,
Grade 24, Item-No 013527,
Grade 40, Item-No 013528,
Grade 60, Item-No 013529,
Grade 80, Item-No 013530,
Grinding gauze double sided, 400mm
Grade 60, Item-No 013548,
Grade 80, Item-No 013331,
Grade 100, Item-No 013332,
Grade 120, Item-No 013333,
Grade 180, Item-No 013549,
Carbide grinding disc
Dismounting action much more aggressive compared to paper disc. High grinding efficiency. High tool life (10
times higher as paper grinding discs).
Disc does not clog, due to open grains. Disc can be cleaned. Silicone or wax-spray can be used additionally
to reduce adhesion.
Grade 16, Item-No 013510,
Grade 24, Item-No 013517,
Cylindrical brush disc, Item-No. 015735
For preparing new anhydrite- and magnesia-screeds.
For abrading of anhydrite- screed, for abrading areas contaminated with paint, mortar,
felt-, foam- and adhesive residues.
Corrugated steel-brush disc, Item-No. 013539
For brushing and preparation of subfloors. For removing the loose sintered material on new anhydrite- and
magnesia screed.
Flat steel brush disc Item-No. 015738
For removal of foam, felt and hessian backing residues. For abrading anhydrite and self-levelling screeds, for
industrial cleaning. Brush length 45 mm. The open brushes work well with tacky residues. The brushes do not clog.
Grinding disc with 6 stones K20 Item-No. 013540
For grinding uneven areas of screed and levelling compounds, paint or gypsum residues. Sharp edges give
high efficiency.
System rotating milling disc, Item-No. 034284:
for removing adhesives, PU- and epoxy-coatings and roughening anhydrite pavements („beating" action).
Due to the aggressive action, the system milling disc should not be used onto chip board.
Milling disc with star wheel segments Item-No. 014243
Additional to the new System-milling-disc the milling disc with star wheel segments offers high efficiency.
Producing a high effect of dismounting and an aggressive action, this disc is used for removing coatings and
adhesive residues. The result is a rough surface. Comes with 3 star wheel segments.
Cleaning pad discs 400mm, 10mm
For initial cleaning, Item-No. 013543, For cleaning and mounting of gauze
For maintenance, Item-No. 013544, For coarse cleaning and removing soil
For polishing, Item-No. 013545, For polishing, cleaning and wax coating
08/2010 Schleifmaschine MAMBO Evo, Artikel-Nr. 061804
Grinding of subfloors
Preparing and grinding of dirty screeds
Grinding and levelling smoothing compounds
Finish-grinding of smoothing compounds
Grinding and abrading timber surfaces
Grinding of parquet varnish, coatings and old surfaces
Fine-grinding of surfaces
Fine-grinding of surfaces
Fine-grinding of surfaces
Fine-grinding of surfaces
grinding/polishing of parquet + cork
Abrading of anhydrite-screed, removing of dirt and adhesive residues
For abrading and rough grinding
19