Itunes Tagging - Sony XAV-712HD Mode D'emploi

2
Select the number that you want to
store.
To operate instant replay
Stores broadcast content in the memory of the
SiriusXM Vehicle Tuner. Memory capacity differs
depending on the SiriusXM Vehicle Tuner. You can
perform operations on that stored content, such as
playing back music.

 Touch to skip to the next/previous content.
Touch and hold to reverse/fast-forward the
contents.
 Touch to pause/resume play after pause.
 Touch to locate to the current content being
broadcast. This button only appears during
instant replay.
To use iTunes Tagging (page 13)
You can save the name of a song broadcast from a
SiriusXM channel to this unit with a few easy steps.
To set parental control
Some SiriusXM channels contain content that is not
suitable for children. You can enable a parental
control passcode for these channels.
1
In Source Settings (page 28), move the
scrollbar up and down to select [SXM
Parental Control].
2
Enter the passcode, then touch [OK].
The passcode display appears when a selected
channel is blocked by the parental control function.
If you want to listen to the channel, enter the
passcode and touch [OK]. If not, touch [Clear].
To change the passcode
1
Select [SXM Parental Control] in Source
Settings, then enter your current
passcode to unlock the parental control.
2
Select [SXM Parental Control] in Source
Settings again, then enter a new
passcode.
  

iTunes Tagging

The iTunes Tag key on this unit, which appears
when song information is broadcast on an HD
Radio station (XAV-712HD only)/SiriusXM channel,
allows you to tag songs and purchase them later.
For details on compatible iPod models, see "About
iPod" (page 36).
For details on iTunes Tagging and the latest iTunes
Tagging compatible models, check the iTunes
website at - http://www.apple.com/itunes/
For details on purchasing a song using "Tagged"
information, check the iTunes website at -
http://www.apple.com/support/itunes/
1
Touch [TAG] when you hear a song you
want to save.
The name of the song is saved to the unit.
2
Connect an iPod to the USB port to
transfer the data.
If an iPod is already connected, the data will be
transferred immediately.
The TAG indicator flashes during the transfer.
3
Sync the iPod to your computer.
The songs will show up in a "Tagged" playlist in
iTunes.
Notes
 If [TAG] is touched immediately after the beginning of
a song or just before the end of a song, the unit may
retrieve the information of the previous or next song,
in addition to the current song.
 The maximum number of tagged songs that you can
save to this unit is 50.
 Once the tagged songs are transferred to the iPod,
they are erased from the unit automatically.
To delete all tagged songs before
transfer
Press HOME, then touch [Tuner]   [Delete].
13
GB