Sonnenkonig JOVA Mode D'emploi page 58

Timer Control (TIMER)
• In running mode, the timer can be set if the respective button on the body is touched or
the button on the remote control is pressed.
• Hours can be added and set to up to 7 hours (maximum). When the timer has elapsed,
the fan will go into standby mode. The time can be set to 1, 2, 3 (1+2), 4, 5 (1+4), 6
EN
(2+4) or 7 (1+2+4) hours with the corresponding indicators lighting up.
• Every time the timer is set, the user will hear a short beep. When the timer has elapsed,
the user will hear a long beep.
• The timer function does not have a memory effect.
Mode Control (MODE)
• In running mode, the mode can be selected if the respective button on the body is
touched or the button on the remote control is pressed.
• The default mode is normal. Every time the mode button is touched or pressed, there
will be a short beep and the mode will change from normal to natural to sleep and back
to normal again.
• When the device is running in normal mode, there will be no indicator light. If it is run-
ning in natural or sleep mode, the corresponding indicators will light up.
LED Control
• The seven-colour LED can be controlled with the LED button on the remote control.
• Indicator lights can be turned off by pressing this button. The button also allows for the
seven-colour LED to change the mode.
• All the lights can be turned on as the related functions are activated.
• When the user presses this button, the mode will change as follows: automatic chang-
ing – pause – manual selection (one of the seven colours ) – off – automatic changing.
• When pressing this button for at least 3 seconds, all the lights will be turned off with
a short beep.
• If the user touches or presses any button after all the lights are off, the lights will turn
on again with the current function being activated.
58