Abus eyseo TV7057 Instructions D'installation page 38

(P.LED) Status display LED
Shows whether the camera is correctly supplied with power.
(RS485) RS485 control port
Camera control using an RS485 interface. Connect (D+) and (D-) correctly to the
control device.
(VIDEO OUT)
BNC output. This connector is for connecting the camera video signal to the VIDEO
IN connector of, for example, the monitor (composite signal: 1Vp-p).
Name
12+ VDC
GND
COM
FOCUS
ZOOM
COM
Menu
D+
D-
Function
12V ±10%, Max 4.1W
Ground for Power Supply
Ground for Zoom, Focus, Menu
Focus (＋: Far,－: Near)
Zoom (＋: Tele, －: Wide)
Ground for Zoom, Focus, Menu
Setup Menu
Use for RS-485 Control
Use for RS-485 Control
38
Note
12V ±0.5V
±6V (＋3V~＋13V, －3V~－13V)
±6V (＋3V~＋13V, －3V~－13V)
±6V (＋3V~＋13V, －3V~－13V)