Reloadable Cartridge Replacement - Oki IP-5620 Guide De Référence Rapide

Reloadable cartridge replacement

This section describes the reloadable cartridge replacement procedure.
Consumables
Upper plate
Spout
Ink cartridge for cartridge holder
Cartridge assembly
Cartridge holder cover
Note
- Check that the colors and types indicated on the ink cartridge tail section's color identification label and the
board's color identification label are the same.
- Usually a small quantity of ink remains in the used ink cartridge removed from the cartridge holder. This is normal.
- Always replace the board together with the used ink cartridge.
- Once an ink cartridge has been set to a cartridge holder, do not remove it until the ink has been entirely used. If a
cartridge that still contains ink is removed and inserted again, ink end may not be detected correctly.
- To temporarily put aside an ink cartridge that still contains ink, store it using the cartridge holder IP5-320 (sold
separately) without removing it from the holder.
30
Color identification label
(ink cartridge back)
Tail section
Lower plate
Caution label
Tail section fixing plate
Color identification label
Board protective sheet
Board
Cartridge holder