Changing Master Code; Setting The Date; Setting The Time - Niko 10-845 Information De Produit

10-845
10.9. Deleting all stored images
Start the programming
Enter master code
All stored images deleted
Wrong entry,
master code unknown

10.10. Changing master code

Start the programming
Enter master code
Master code changed
Wrong entry,
master code unknown

10.11. Setting the date

Start the programming
Enter date
Date set
Invalid value

10.12. Setting the time

Start the programming
Enter the time
Setting the time
Invalid value
54
If not already done.
*94 # master code # master code #
Master code = 6-digit number (own master code or factory settings)
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
All images in the folders on the SD card have been deleted. This process may
take a few minutes.
If you press #, a negative confirmation tone sounds. The yel-low LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
* 98 # old master code #new master code # new master code #
Master code = 6 digits
For safety reasons the preset master code must be
changed when put into service.
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
*95 # YY # MM # DD # format #
YY = year, MM = month, DD = day (year: from 2000)
Format (FI = 0)
= 0 DD.MM.YYYY
= 1 MM.DD.YYYY
= 2 YYYY-MM-DD
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
*96 # hh # mm # ss #
hh = hour, mm = minute, ss = second (hour: 00 to 23)
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
9 4
9 8
9 5
9 6
EN