Whirlpool WTE25112 Mode D'emploi page 27

4. Unscrew the pin located on the right (Fig. 6/Detail-A) and
screw it to the left (Fig. 6/Detail-B)
5. Replace the top bushing and top bushing cap (Fig. 7) (You can
use the new bushing cap supplied in the user's manual bag).
Remove the bottom bushing and transfer it to the left (Fig. 7)
6. Replace the top bushing and top bushing cap (Fig. 8).
Remove the bottom bushing and transfer it to the left (Fig. 8).
7. Turn the middle hinge 180º. Reassemble the refrigerator and
freezer doors together with the middle hinge (reverse step 2).
Fix the middle hinge in place by tightening the screws (Fig. 9).
27
DETAIL-B
DETAIL-B
FREEZER
DOOR
Turn the middle
hinge 180°
Fig. 6
Fig. 7
Fig. 8
Fig. 9