Table des Matières
Publicité
Checking Battery Info
When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes
remaining.
Detailed information for the battery is displayed Battery menu of the transmitter: Utilities > Battery
•
Battery: The chemistry type of for the installed battery (Shure, Alkaline, Lithium, NiMH)
•
Bars: Indicates the number of bars displayed
•
Time: Battery runtime
•
Charge: Percentage of charge capacity
•
Health: Percentage of current battery health
•
Cycle Count: Total of the number of charging cycles for the installed battery
•
Temperature: Battery temperature reported in Celsius and Fahrenheit
Important Tips for Care and Storage of Shure Rechargeable Batteries
Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.
•
Always store batteries and transmitters at room temperature
•
Ideally, batteries should be charged to approximately 40% of capacity for long-term storage
•
Regularly clean the battery contacts with an electrical contact cleaner designed for gold contacts and safe on plastics
•
During storage, check batteries every 6 months and recharge to 40% of capacity as needed
Tip: For additional rechargeable battery information, visit www.shure.com.
Piles AA et autonomie de l'émetteur
Les émetteurs sont compatibles avec les types de piles AA suivants :
•
Alcaline
•
Hydrure métallique de nickel (NiMH)
•
Primaire au lithium
Un témoin de pile à 5 segments représentant le niveau de charge des piles de l'émetteur est affiché sur les écrans de
l'émetteur et du récepteur. Les tableaux suivants indiquent l'autonomie restante approximative en heures et minutes.
Piles alcalines
Durée de fonctionnement des piles
( heures et minutes)
Témoin de pile
UHF
2 mW/10
mW
8H00 à
6H00
1.x
2 mW/
35 mW
30 mW
10 mW
3H30 à
5H30 à
3H45 à
3H00
4H15
3H00
Shure Incorporated
10/26
Publicité
Table des Matières
