BRAND Transferpette -8/-12 Mode D'emploi page 53

What to do
7.
Repeat aspiration
of liquid in revPIP
mode
8.
Initiate blow-out
9.
End pipetting
How to do it
Press the pipetting key
again and the set volume is
aspirated into the tips. Press
the pipetting key again and
the volume is discharged
again, and so on...
Press the ENTER key after
the last pipetting operation.
The display shows ‚blo' for
blow-out.
Press the pipetting key
once to initiate the blow-out
process. The residual liquid
is discharged.
After the residual liquid is
discharged (blow-out), the
display moves back to the
start position.
revPIP Mode
Keys to press Display readout
1x
1x
1x
53