a
Cordless line trimmer
INTRODUCTION
This tool is intended for the cutting of grass and weeds
•
under bushes as well as on slopes and edges that can
not be reached with a lawn mower
•
This tool is not intended for professional use
•
Check whether the packaging contains all parts as
illustrated in drawing 2
•
When parts are missing or damaged, please contact your
dealer
•
Read this instruction manual carefully before use
and save it for future reference 3
•
Pay special attention to the safety instructions
and warnings; failure to follow these may result in
serious injury
TECHNICAL DATA 1
TOOL ELEMENTS 2
Cutting guard
A
B
Guide handle
C
Handle adjustment knob
D
Locking sleeve
E
Telescopic tube
F
Trigger switch
G
Safety switch
H
Pivoting button
J
Spool cover
K
Spool
Spool hole
L
M
Flower guard
N
Line cutting blade
P
Edging button
Storage rail
Q
R
Storage adapter
S
Edging wheel
Line feed button
T
V
Spool holder
W
Ventilation slots
X
Main handle
Z
Line slots
AA Battery level indicator
SAFETY
GENERAL
• This tool can be used by
children aged 8 and above
and by persons who have
physical, sensory or mental
limitations or a lack of
experience or knowledge if a
person responsible for their
safety supervises them or has
instructed them in the safe
operation of the tool and they
understand the associated
0230/0240
dangers (otherwise, there is a
danger of operating errors and
injuries)
• Supervise children (this will
ensure that children do not
play with the tool)
• Cleaning and user
maintenance of the battery
charger shall not be made by
children without supervision
•
Be familiar with the controls and the proper use of the
tool
The user is responsible for accidents or hazards
•
occurring to other people or their property
•
Use only accessories and replacement parts
recommended by SKIL
•
Never mount metal cutting elements onto this tool
PERSONAL SAFETY
•
Keep hands and feet away from the cutting line while
trimming, especially when switching on the tool
•
Always wear eye protection, long trousers and sturdy
shoes when operating the tool
•
Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
pets are nearby
Never operate the tool when you are tired, sick or under
•
the influence of alcohol or other drugs
BEFORE USE
•
Only use the tool in daylight or with appropriate artificial
lighting
•
Never operate the tool with a damaged cutting guard or
without the cutting guard mounted
•
Check the functioning of the tool before each use and
after any impact; in case of a defect, have it repaired
immediately by a qualified person (never open the tool
yourself)
•
Before use, thoroughly inspect the cutting area and
remove any object that the tool may sling during cutting
(such as stones, loose pieces of wood, etc.)
DURING USE
•
Avoid using the tool in bad weather conditions, especially
when there is a risk of lightning
•
Do not use the tool on wet lawns
•
Keep proper balance and footing at all times; do not
overreach
•
Operate the tool at a walking pace only (do not run)
•
The cutting line continues to rotate for a short time
after the tool is switched off
•
Do not cut grass which is not on the ground (e.g. on walls
or rocks)
•
Do not cross roads or gravel paths with the tool still
running
•
Do not get distracted and always concentrate on what
you are doing
•
Always switch off the tool and remove the battery
- whenever leaving the tool unattended
- before clearing jammed material
- before checking, cleaning or working on the tool
11