HAIDER BIOSWING 550 Mode D'emploi page 12

Arm, Height adjustable (1F)
4
To relieve the strain on shoulders and neck, the arms can be adjusted in
height. Adapt the height so that you do not feel any tension in the shoul-
der area.
Adjustment of Arm in Height
• Version with rotary knob:
The height can be adapted gradually by using the rotary knob
• Version with cord-pull switch:
Pull the operating element
arms at the desired height and then release the cord-pull switch.
(Both versions allow adjustment to the width of the arms by using the elongated guide with position
holes at the beam holding the arms up. Loosen the screws at the bottom of the seat cushion. Adjust
the width by pulling the arms outward or inward and then tighten the screws firmly.)
4a 4b
upward. At the same time, adjust the
4b
english | 22
Arm, Multifunctional (4F)
To relieve the strain on your shoulders and neck, the arms can be adjusted in
height. Adjust the height so that you do not feel any tension in the shoulder
area. Furthermore, the armrests can be adjusted to the individual proportions
of the upper body in breadth and depth. They can also be turned according
to the position of the forearm.
Adjustment of Arm in Height
4a
Pull the cord-pull switch
the desired height and release the cord-pull switch.
Adjustment or Movement of Armrests in Breadth and Depth
While noticing resistance from the catches, push the armrests
leftward or forward/backward or – alternatively – swivel the armrests out-
ward/inward.
(Both versions allow adjustment to the width of the arms by using the elongated guide with position
holes at the beam holding the arms up. Loosen the screws at the bottom of the seat cushion. Adjust
the width by pulling the arms outward or inward and then tighten the screws firmly.)
upward. At the same time, adjust the armrests to
5a
5b
5a
english | 23
5
rightward/
5b