Elem Garden Technic FBV3000-7TEGCW Traduction Des Instructions D'origine page 50

A warning that the vibration emission during actual use of the power tool can
differ from the declared total value depending on the ways in which the tool is used and
of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).
ELECTRICAL CONDITIONS
Avoid electrocution  used a residual current device 30mA.
The splitter months with a motor 230 Volt ~ 50Hz must be plugged into a standard 230V 10% /
50Hz 1 Hz power supply equipped with a protective device for undervoltage, overvoltage,
overcurrent and also a residual Current Device (RCD) with a maximum rated residual current is
0.03A. The electrical connection cables rubber shall conform to the EN60245 standard, which is
indicated by the letters H 07 RN. Cables should be identified, it is a legal requirement.
50