Use a soft moistened cloth to clean the set.
Avoid placing the babyphone in direct sunlight or wet locations.
Do not let water and sand enter the units.
In case the transmitted signal is disturbed or interrupted, check the functionality
at another location first, prior to send it in for repair.
Always remove the batteries in case the unit is not in use for a longer period.
Should any problem occur, please check the list below.
bad or no reception:
-
battery is weak or empty, replace battery
-
channel switch is set wrong, change channel
-
transmitter-receiver distance too large, reduce distance
-
adapter connection wrong, check adapter connection
noise and other sounds:
-
other transmitter present, change channels
-
disturbance by other devices, switch off other devices (when possible)
shrill tone:
-
baby-unit too close to the receiver, increase distance
-
volume of receiver is set too high, reduce volume
MAINTENANCE
TROUBLESHOOTING
14